Parts by Type

print This page

Center Bearings

Filters: BEARING ID = 1.574,
PART NUMBER BEARING ID CENTER TO CENTER OF MOUNT HOLES BRACKET WIDTH C/L TO BASE APPLICATION NOTES VEHICLE CLASS BRAND
210144-1X 1.574 6.625 2.000 2.440 1350,1410,1448 LD Spicer
210391-1X 1.574 6.625 2.000 2.440 1350,1410,1448 LD Spicer
210433-1X 1.574 6.625 2.000 2.440 1350,1410,1448 LD Spicer
210873-1X 1.574 6.625 1.226 2.250 1310,1330,1350,1410 LD Spicer
212028-1X 1.574 6.625 1.226 2.250 1410 Rubber w/ canister / Studs in bracket / 232817 boot can included LD Spicer
212032-1X 1.574 6.625 1.226 2.630 GM Has a .380" spacer / Rubber w/ canister / Studs in bracket / 232817 boot can included. LD Spicer
211963-1X 1.574 3.380 1.742 3.250 1350 Dodge 4x4, Mounting bracket is threaded (M10 X 1.5) LD Spicer
211359X 1.574 6.625 1.226 2.250 1350,1410 LD Spicer
212053-1X 1.574 6.625 1.520 2.250 1350 LD Spicer
5003684 1.574 6.625 1.226 2.750 1350, 1410 Active - Has a 1/2" spacer attached to bracket, rubber cushion w/canister; less boot can LD Spicer
210866-1X 1.574 6.625 1.226 2.250 1350, 1410 Ford, Chevy applications LD Spicer
211260X 1.574 6.625 1.226 2.250 1350, 1410 Active LD Spicer
211735-3X 1.574 6.625 1.226 2.250 1350, 1410 LD Spicer
211793-1X 1.574 6.625 1.226 2.250 1350, 1410 LD Spicer
211848-1X 1.574 3.380 1.742 3.250 Dodge Dodge 4x4, Mounting bracket is threaded (7/16-14) LD Spicer
212030-1X 1.574 6.625 1.226 2.250 1350, 1410 Rubber w/ canister / 232817 boot can included LD Spicer
212031-1X 1.574 6.625 1.226 2.250 1350, 1410 Rubber w/ canister / 232817 boot can included LD Spicer
212258-1X 1.574 6.625 1.226 2.250 Nissan Rubber w/ canister / 232817 boot can included LD Spicer
211037-1X 1.574 6.625 2.000 2.440 1350, 1410 LD Spicer
5017407 1.574 6.620 0.992 2.748 Ford **** FLAT BOTTOM ON BRACKET. ( SITS FLAT ) Used on F250 & F350 applications LD Spicer
212144-1X 1.574 6.625 1.520 2.250 1350, 1410 Rubber w/ canister / Nuts attached to bracket / 232817 boot can included LD Spicer
3580-10 1.574 6.625 1.726 2.250 1350 Ford LD PTI
3580-20 1.574 6.625 1.375 2.250 Dodge Dodge Square with slotted holes, Square like 40026573 LD PTI
3R80-10 1.574 1.500 3.400 2.500 GM Cadillac Buick LD PTI
3R80-25 1.574 2.250 3.690 3.500 GM Cadillac Buick LD PTI
3R80-30 1.574 5.125 1.720 0.625 GM Cadillac, Housing and bearing included LD PTI
3R80-35 1.574 0.000 0.000 0.000 Buick Buick, Bearing not included LD PTI
4180-10 1.574 6.625 2.260 2.337 Dodge Dodge/ 11 x 27 mount slots / Supersedes 40041712 LD PTI
4180-20 1.574 6.625 2.125 2.161 GM GM Van / No studs / 14mm mounting holes LD AAM
4180-30 1.574 6.625 1.700 2.500 1410/1480/1550 Dodge Rams, Aluminum bracket, 11mm slotted holes. Comes with bearing retainer, see 1670-0002 for retainer LD AAM
3180-47 1.574 1.500 1.800 3.500 1310 Chevrolet, Billet aluminum bracket w/ poly urethane LD PTI
3180-99 1.574 0.000 1.250 2.250 1310, 1330, 1350 Urethane insert for standard 1.25" bracket w/ 1.574" bearing ID. ( No bracket or bearing included) LD PTI
3R80-15 1.574 0.000 0.000 0.000 Multiple 40x62x15 Bearing only. Fits in housings of 3R80-10, 3R80-25, 3R80-30 and 3R80-35 LD PTI
4180-40 1.574 6.625 2.125 2.675 GM 10mm Spacer and M10-1.5x50mm studs. LD AAM
3580-30 1.574 4.331 1.180 2.118 GM Square outer bracket w/ studs protruding from underneath housing & Octagon inner rubber LD PTI
3580-40 1.574 6.665 1.226 2.250 Nissan rubber cushion w/o canister LD PTI
4180-31 1.574 6.626 1.700 2.500 1410/1480/1550 Dodge / Aluminum bracket 11 x 27 mount slots LD AAM
40026573 1.574 6.625 1.375 2.250 Dodge Dodge / 13 x 29 mount slots for G56 trans / Square like 3580-20 with slotted holes. LD AAM
40048726 1.574 6.625 2.260 2.287 Dodge Dodge / 13 MM mounting holes LD AAM
4180-25 1.574 6.625 2.125 2.161 GM Chevrolet / M10 x 1.5 studs 32.5mm long, black housing LD PTI
5017406 1.574 6.620 0.965 1.474 Ford **** CURVED BOTTOM. ( DOES NOT SIT FLAT ) Used on F250 & F350 applications LD Spicer
5017405 1.574 6.620 0.965 2.524 Ford **** FLAT BOTTOM ON BRACKET. ( SITS FLAT ) Used on F250 & F350 applications LD PTI
40182860 1.574 4.330 2.125 2.910 GM LD AAM
40182865 1.574 6.625 1.125 2.161 GM Slotted Holes LD AAM
5023815 1.574 6.533 2.850 2.752 Ford Super Duty F450 F550 LD Spicer
4180-15 1.574 3.380 1.742 3.250 Dodge Same as 211848-1X. Dodge 4x4, Mounting bracket is threaded ( 7/16-14) LD PTI
P211499X 1.574 6.625 1.726 2.250 1350 Ford LD PTI
N212093-1X 1.574 6.620 1.520 2.250 LD Neapco
N213075 1.574 6.630 2.300 Ram 1500, 2500, 3500. 2004-11 0.44" Bolt hole diameter LD Neapco
N214033X 1.574 6.620 2.780 FORD F250, F350 .50 Bolt hole LD Neapco
N211361-1X 1.574 6.620 2.700 FORD F250, F350, F450 LD Neapco
N214034X 1.574 6.620 2.490 FORD F250, F350 LD Neapco
N214035X 1.574 6.620 2.250 FORD F250, F350 BOLT HOLE .50 LD Neapco
N215263 1.574 6.620 2.520 RAM 3500 2011-2017 BOLT HOLE 0.44 LD Neapco
N235150 1.574 6.620 2.240 DODGE, GMC, CHEV 2001-2012 Bolt hole .50 LD Neapco
N235200 1.574 6.620 2.280 CHEV, GMC 1999-2012 Bolt hole .50 LD Neapco
4180-60 1.574 6.620 0.992 2.748 Ford Aluminum flat bottom bracket. Used on F250 & F350 applications LD PTI
4180-45 1.574 6.533 2.850 2.752 Ford Super Duty F450 F550 LD PTI
4180-50 1.574 6.620 0.965 2.524 Ford **** FLAT BOTTOM ON BRACKET. ( SITS FLAT ) Used on F250 & F350 applications LD PTI
3580-35 1.574 7.625 1.970 2.750 1350 Sprinter, Used in 1350 series new shaft conversions LD PTI
3580-45 1.574 6.181 2.125 2.125 Lincoln Navigator without spacers LD PTI
3580-50 1.574 6.181 2.125 2.382 Lincoln Navigator with spacers LD PTI
4180-46 1.574 6.533 2.850 2.752 Ford Super Duty F450 F550 / Dodge/Ram 2500 3500 threaded insert, supersedes 4180-45 LD PTI
P210866-1X 1.574 6.625 1.226 2.250 1350, 1410 LD PTI
40048725 1.574 6.625 2.260 2.337 Dodge Dodge/ 11 x 27 mount slots / Supersedes 40041712 LD AAM
4180-55 1.574 6.625 1.000 1.500 Ford F-250/F-350 Bracket overall width 8.25" LD PTI
211499X 1.574 6.625 1.726 2.250 1350 Ford F-150 LD PTI
934-029 1.574 6.625 2.125 2.161 Chevrolet Chevrolet / M10 x 1.5 studs 32.5mm long LD PTI
4180-35 1.574 6.625 1.226 2.250 1410 M10-1.5 Studs in bracket LD PTI
4180-16 1.574 3.380 1.742 3.250 Dodge Same as 211963-1X. Dodge 4x4, Mounting bracket is threaded (M10-1.5) LD PTI
4880-10 1.574 0.000 0.000 2.600 Isuzu NPR, NPR-HD, NQR, ENCAVA No metal bracket LD PTI
40021429 1.574 6.625 2.125 2.161 GM Chevrolet / M10 x 1.5 studs 32.5mm long LD AAM
40021334 1.574 6.625 1.375 2.250 Dodge Dodge, similar to 3580-20. Slotted holes running length of part. 6.4mm x 14.3mm mounting holes. LD AAM